AJW Roofing Ltd provides chimney repairs and repointing throughout Pulborough, West Sussex. From deteriorating mortar joints and damaged chimney pots to failed lead flashing, loose brickwork and complete chimney removal, we can inspect the chimney and recommend the most appropriate repair for its condition.
Chimney Repair Services in Pulborough
Chimneys are exposed to wind, rain, frost and repeated temperature changes, so mortar joints, bricks, pots and leadwork can deteriorate over time. Small defects can eventually allow water into the roof or make parts of the chimney unstable if they are left unresolved.
AJW Roofing carries out practical chimney repairs for properties across Pulborough, including traditional houses, modern homes, extensions and other buildings with active or redundant chimney stacks.
Removal and replacement of deteriorated mortar joints to restore weather resistance and help stabilise the chimney masonry.
Repair or replacement of damaged, loose or badly weathered chimney bricks where localised masonry has deteriorated.
Replacement of cracked, damaged or unstable chimney pots, including suitable decorative styles where required.
Repair and replacement of lead flashing around the base of the chimney where failed detailing is allowing water into the roof.
Safe removal of redundant or badly deteriorated chimney sections with the surrounding roof made weather-tight afterwards.
Inspection of visible chimney defects to identify damaged mortar, masonry, pots and roof junctions before repair work is recommended.
Chimney Repointing in Pulborough
Mortar joints protect the spaces between chimney bricks from weather penetration. As mortar ages it can crack, crumble or wash out, particularly on exposed chimney stacks where wind-driven rain and frost place continual stress on the masonry.
Repointing involves carefully removing loose or deteriorated mortar and replacing it with suitable fresh mortar. When carried out at the right time, repointing can help prevent moisture reaching deeper into the chimney and reduce the risk of individual bricks becoming loose.
We assess the condition of both the mortar and the surrounding brickwork before starting so damaged bricks or other defects can be dealt with as part of the same repair where necessary.
Damaged Chimney Brickwork
Chimney bricks can deteriorate when moisture enters the masonry and repeated freezing and thawing causes the surface to break down. Older bricks may also become loose where the surrounding mortar has failed.
Localised damage can often be repaired by replacing individual bricks and repointing the affected area. Where deterioration is more extensive, a larger section of the stack may need rebuilding to restore stability.
Lead Flashing Around Chimneys
The junction between a chimney and the surrounding roof is one of the most vulnerable areas for water ingress. Lead flashing is used to create a weather-resistant transition between the vertical chimney masonry and the roof covering.
If the lead has lifted, split, slipped or become poorly sealed into the masonry, rainwater can enter around the chimney even when the brickwork itself appears sound.
AJW Roofing can inspect and repair or replace defective chimney flashing together with associated tiles, slates or roof details where required.
Chimney Pot Replacement
Cracked or unstable chimney pots should not be ignored because sections can loosen further in severe weather. We can replace damaged pots and ensure the surrounding top of the chimney is left secure and properly finished.
Where appearance matters, particularly on older or more traditional properties, an appropriate replacement style can be selected to work with the character of the existing chimney.
Chimney Removal and Redundant Chimneys
Some chimneys are no longer required, especially where fireplaces have been permanently removed or the stack has deteriorated beyond economical repair. In these situations, partial or complete removal may be considered.
Chimney removal needs to be planned carefully because the stack passes through the roofing system and may form part of the building structure. Where an external chimney section is removed, the surrounding roof must be reconstructed and made properly weather-tight.
AJW Roofing can assess the roofing work associated with chimney removal and coordinate the necessary roof repairs, brickwork, leadwork and scaffolding where required.
Signs Your Chimney May Need Repair
Chimney problems are often easier to deal with before loose masonry or water penetration causes damage to the roof or internal finishes.
- Cracked or crumbling mortar joints
- Loose, cracked or spalling chimney bricks
- Leaning or visibly unstable chimney pots
- Water staining around the chimney inside the loft
- Damp patches on ceilings or chimney breasts
- Lead flashing lifting away from the chimney
- Open joints where flashing enters the brickwork
- Loose masonry following storms or high winds
- Pieces of mortar or brick found on the roof or ground below
If you notice any of these signs, arranging an inspection can help establish whether a localised repair is sufficient or more extensive work is needed.
Why Chimney Problems Can Cause Roof Leaks
A chimney interrupts the normal roof covering, creating several junctions where rainwater must be directed safely around the masonry. This means a leak appearing close to a chimney can have several possible causes.
Water may enter through failed flashing, deteriorated pointing, damaged masonry, defective roof tiles or slates around the stack, or through poorly sealed details at the top of the chimney.
Inspecting the chimney together with the surrounding roof helps avoid repairing one visible defect while leaving another source of water ingress unresolved.
Repair or Rebuild a Chimney?
The right approach depends on how much of the chimney has deteriorated. Localised mortar failure or isolated damaged bricks can often be repaired without rebuilding the whole stack.
Rebuilding becomes more appropriate where masonry is extensively degraded, large sections are loose or unstable, or previous patch repairs have failed to restore the integrity of the chimney.
We assess the visible condition of the stack before recommending work so the repair is proportionate to the actual problem.
Local Chimney Repair Specialists in Pulborough
AJW Roofing Ltd is based in Pulborough and carries out chimney and roofing work throughout the village and surrounding West Sussex communities.
Local properties include traditional homes, rural buildings, established residential housing and more modern developments. Chimney construction and materials can vary between these property types, so repairs need to take account of the existing brickwork, roof covering and surrounding details.
Chimney work can also involve several associated trades. AJW Roofing can coordinate roofing, brickwork, leadwork and scaffolding as part of the same project where required.
Why Choose AJW Roofing for Chimney Repairs in Pulborough?
- Family-run roofing company based in Pulborough
- More than 20 years of roofing experience
- Chimney repointing and brickwork repairs
- Chimney pot replacement
- Lead flashing repair and replacement
- Chimney removal and associated roof repairs
- Roofing, brickwork, leadwork and scaffolding coordinated where required
- Fully insured roofing company
- Free, no-obligation estimates
- Residential and commercial roofing work
Other Roofing Services in Pulborough
Chimney work is one part of the roofing services we provide locally. Explore our other Pulborough roofing services below.
View our complete range of roofing services for homes and businesses throughout Pulborough and the surrounding area.
View Roofing Services →Installation, replacement and repair of tiled, slate and traditional pitched roofs throughout Pulborough.
View Pitched Roofing →Flat roof installation, replacement and repair for extensions, garages and other properties in Pulborough.
View Flat Roofing →Guttering, fascia and soffit installation and repair to help manage rainwater and protect your property's roofline.
View Roofline Services →Chimney Repairs & Repointing in Pulborough FAQs
Do you repair chimneys in Pulborough?
Yes. AJW Roofing carries out chimney repairs throughout Pulborough and the surrounding West Sussex area, including repointing, brickwork repairs, chimney pot replacement and lead flashing work.
When does a chimney need repointing?
Repointing may be required when mortar joints have cracked, become loose or started to wash out. Replacing deteriorated mortar can help reduce water penetration and protect the surrounding brickwork.
Can damaged chimney bricks be replaced?
Yes. Individual damaged or badly weathered bricks can often be replaced where the rest of the chimney remains serviceable. More extensive deterioration may require partial rebuilding.
Can you repair lead flashing around a chimney?
Yes. We can repair or replace defective lead flashing around chimney stacks where failed detailing is allowing water into the roof.
Do you replace damaged chimney pots?
Yes. AJW Roofing can replace damaged, cracked or unstable chimney pots and make good the surrounding chimney top where required.
Can you remove an unused chimney?
Chimney removal may be possible where a stack is redundant or badly deteriorated. The work needs to account for the building structure and the surrounding roof, which must be reconstructed and made weather-tight after removal.
Can a damaged chimney cause a roof leak?
Yes. Water can enter through failed pointing, damaged masonry, defective lead flashing or faults in the roof covering around the chimney. Inspecting the complete chimney and roof junction helps identify the actual source of the leak.
Do you provide free chimney repair estimates?
Yes. AJW Roofing provides free, no-obligation estimates for chimney repairs and repointing in Pulborough and surrounding West Sussex areas.